5 Most Common Problems with Fujinon Binoculars (Troubleshooting)

  • By: Imad

If you’re a birdwatcher, nature enthusiast, or someone who enjoys the outdoors, you may be interested in purchasing a pair of Fujinon binoculars. However, before buying, it’s important to be aware of some of the common problems consumers have reported with these products.

Some users have reported issues with the eyecups on Fujinon binoculars, saying that they are not comfortable or do not provide a good seal. There have also been reports of problems with these binos’ focus knobs, including them being too stiff or difficult to turn.

But instead of relying on these reports, how about we dive deeper and discuss Fujinon binocular problems to know better? So, if you don’t want to struggle with using Fujinon binoculars, keep reading.

List Of Common Problems With Fujinon Binoculars

These are a few problems reported by Fujinon customers over the years:

  • Blurry or distorted images
  • Poor low-light performance
  • Narrow field of view
  • Heavy and bulky designs
  • Expensive
  • Difficult to focus
  • Prone to fogging
  • Not waterproof
  • Eye fatigue
  • Limited warranty
  • Poor customer service
  • Hard to use with glasses
  • Case and straps not included in some packages
  • Not compatible with some tripods

Common Problems With Fujinon Models Solved

Model Problem Solution
Fujinon 15×60 HB  Chromatic aberration in bright views Find a good viewing angle according to the ambient light
Fujinon Techno-Stabi 12×28 IS Not entirely water-resistant Use lens covers and keep these binos safe in outdoor adventures
Fujinon Polaris 7×50 Eye lens protectors are very loose Be vigilant about the lenses
Funjion Techno-Stabi 16×28 Slow image stabilization Hold these binos steadily and move slowly
Fujinon Techno-Stabi 14×40 Edgy eyecups Don’t hold these binoculars too close to your eyes
Fujifilm Fujinon HC 8×42 Resistant focusing knob Lubricate the focusing wheel 
Fujinon Polaris 16×70 Lenses get smudged very easily Don’t touch glass lenses and keep a cleaner handy
Fujinon Mariner 7×50 Hardshell plastic casing doesn’t offer a good grip Get a nylon binocular chassis
Fujinon FMTR 7×50 Very heavy for their specs Use a tripod and don’t hold these binoculars for extended periods

Fujinon Binoculars Alignment Problems

There are a few reasons why your Fujinon binoculars might not be properly aligned. 

  • The eyepieces may not be set at the proper distance from your eyes if you don’t have the right type of eyecups installed or if they’re not positioned right. 
  • The lenses inside the binoculars may not be in their spot if the binoculars were dropped or if they were poorly manufactured. 
  • The prisms inside the binoculars may not be correctly aligned if the binoculars are dropped or improperly repaired.

If your Fujinon binoculars are not aligned properly, here’s what you can do to fix the problem:

  • First, check to ensure that the eyepieces are at the same level. If they are not, you will need to adjust them so that they are. 
  • Next, check if the objectives are correctly aligned. If they are not, you will need to adjust them as well. 
  • Finally, see if the prisms are adequately aligned. If they are not, you will need to adjust them.

These easy steps will likely align your Fujinon binoculars and improve their performance alongside. 

Fujinon Binoculars Double Vision Problems

When you are looking through a Fujinon binocular, you may notice that there are two images side by side. This is because the lenses in the binoculars are not aligned correctly. This can be a problem if you are trying to use your binoculars to observe wildlife or scenery.

  • In order to fix this problem, you will need to adjust the focus of the binoculars. You can do this by turning the knob on the side of the binocular. Once you have adjusted the focus, you should see a single image.
  • If you are still seeing double images, you may need to adjust the diopter. The diopter is located on the eyepiece of the binocular. You can turn the diopter until the images are clear.

If you are still having trouble, you may need to contact Fujinon customer service for assistance.

Fujinon Binoculars Chromatic Aberration

One of the most common problems with Fujinon binoculars is chromatic aberration. 

This occurs when different colors of light are not brought into focus at the same point. This results in a “fringing” or “halo” effect around objects.

Here are a few things that can cause chromatic aberration in your Fujinon binoculars:

  • Their lenses are not of good quality, and even the slightest amount of light causes a halo effect in your views. 
  • The lenses are not properly aligned. This can happen if the binoculars are dropped or knocked around.
  • The light source is not directly in front of the binoculars, i.e. when you look at an object off to the side.

Sure, CA is a severe problem for optic lovers, but it’s not a deal-breaker. Here are a few ways to reduce or eliminate chromatic aberration:

  • Properly align the lenses to prevent edge-fringing.
  • Use a light source that is directly in front of the binoculars. You can do this by using a flashlight or other light source.
  • Move your head so that the light source is in line with the binoculars. This may not always be possible, but it is worth a try.

Chromatic aberration can be a frustrating problem, but there are definitely ways to reduce or eliminate it. So don’t give up on your binos because of this fringing effect! 

Fujinon Binoculars Eye Relief 

One of the most common issues that users have with Fujinon binoculars is eye relief. This can be a problem for those wearing glasses or having sensitive eyes. The good news is that there are some things that you can do to alleviate this issue.

  • Make sure that you are using the proper eyecups. If you are not, you may be putting too much pressure on your eyes, which can cause discomfort. 
  • Try adjusting the interpupillary distance. This is the distance between your two pupils, and you can modify it by turning the knob on the binoculars. 
  • If you find that Fujinon binoculars are not giving you the eye relief that you need, invest in good-quality replacement eyecups to overcome this hassle. 

Fujinon Binoculars Lens Fogging Issue

Some Fujinon binoculars owners have reported that their lenses fog up easily, even in moderate humidity. This can be a serious problem if you’re trying to use your binoculars in humid or damp conditions.

There are a few possible causes of this issue:

  • The lenses are not properly sealed against the elements.
  • The lenses are made of poor-quality materials that are prone to fogging.
  • The binoculars are not properly ventilated, allowing moisture to build up inside the lenses.

If your Fujinon binocular lenses fog up easily, you may want to try one or more of the following solutions:

  • Make sure that the lenses are properly sealed against the elements. Check the O-rings and gaskets to ensure that they are in good condition and correctly installed.
  • If the lenses are made of poor-quality materials, you may want to consider replacing them with lenses made of better-quality materials.
  • If the binoculars are not properly ventilated, you may want to try opening up the ventilation holes or slots to allow more air circulation.
  • You can also try using a lens cloth or lens paper to wipe away any moisture built up on the lenses.

Fujinon Binocular Replacement Parts

Here are some Funjnon binoculars’ replacement parts to keep in your books:

  • Fujinon Lenses
  • Prisms
  • Eyepieces
  • Ocular lenses
  • Battery doors
  • Rubber eyecups
  • Nylon binocular chassis
  • Diopter rings
  • Focus knobs

Fujinon Binoculars Repair (Cost & Contact Details)

There are a few different ways to get Fujinon binoculars from the Fujinon customer service center.

The first way is to call the customer service center and speak with a representative. The second way is to fill out an inquiry form at Fujinon’s official website and wait for their team to guide your further. Each of these methods has its own set of instructions, so be sure to follow the instructions that correspond with the method you choose.

Fujinon Contact Number: 973-633-5600

Also Read:

Final Thoughts 

Fujinon binoculars are a great choice for anyone looking for a new pair of binoculars. With a wide range of models to choose from, there is sure to be a Fujinon binocular perfect for your needs. This manufacturer is known for its high-quality optics and construction standards and is used by many professionals in various fields. Whether you need binoculars for bird watching, hunting, or just enjoying the outdoors, Fujinon binoculars are a great choice. 

The best thing about Fujinon binoculars is a responsive customer support team you can approach upon facing any issue with these optics. You can also find product manuals for the latest Fujinon binoculars from their site and understand their nuances before calling for professional help. 

So, the next time you encounter a problem with Fujinon binoculars, use some elbow grease and technical expertise to fix it instead of feeling disappointed.

Vortex Binoculars Not Working

Previous Post

5 Most Common Vortex Binoculars Problems (SOLVED)

Next Post

5 Most Common Leupold Binoculars Problems (FIXED)

Leupold binoculars not working